How To Paint Behind a Toilet

The bathroom is likely to be most frequently used at home. Your guests too often use your bathroom. It’s therefore essential to keep it neat and current, at a minimum, to ensure that you don’t feel resentful about the amount of time you spend there. It’s good to know that keeping your bathroom modern doesn’t need to be a huge bathroom remodel. Sometimes, a brand-new paint color is enough to refresh a space that makes it look fresh and thrilling. Contrary to painting projects in other rooms, in the bathroom, it is essential to consider the best way to paint over the toilet.

Many people also prefer to hung painting on their toilet walls for better aesthetics looks which makes it look good. All toilets are challenging to paint behind, although corner toilets are the worst because there is no room to get behind. Even if you manage to get behind, it’s not uncommon to end up with paint on the toilet.

It will look unprofessional if you leave the area behind the toilet unpainted or have paint splodges on the toilet seat and cistern. Fortunately, there are some steps you can take to help improve your toilet painting results.

What Supplies Will You Need?

To paint behind the toilet, you’ll require the following materials:

• Paint (in the finish and color you prefer)
• Tape for painting
• Paint roller
• Paintbrush
• Paint tray
• Primer
• Sandpaper (medium fine grit)
• Solution for cleaning (such as vinegar or TSP)
• Bucket
• Sponge
• Gloves
• Clothing for protection

How to Paint Behind a Toilet? A Step-by-Step Guide

Prepare the bathroom by following the steps: 

Step 1: Prepare the Bathroom

For any painting task, the primary step to take is preparing the space. Remove any objects from the bathroom that might be in the way or spill paint on the surfaces. Cover the bathtub, sink, and any other surfaces with plastic sheets to protect the surfaces from paint spills.

Step 2: Remove the Toilet Tank Lid and Seat Cover

To help paint on the inside of your toilet, you’ll have to take off the lid of the toilet along with the toilet seat. You can remove it by hand. You can use a flathead screwdriver to gently remove them if they’re stuck.

Step 3: Protect the Toilet

To guard the toilet against paint splashes, wrap it in plastic sheeting, or put on an enclosure for the toilet. Ensure the plastic is secured and secure against the toilet to prevent the paint from getting into.

Step 4: Clean the Wall

Before painting, it’s crucial to clean the walls thoroughly so the paint sticks properly. Make a cleaning solution using TSP or vinegar and warm water in an empty bucket. Dip a sponge into the solution and then clean off the walls. Be sure to wash the sponge often and replace the cleaning solution when it gets dirty.

Step 5: Apply Painter’s Tape

Place the painter’s tape around areas around the space you are painting to shield the surfaces and walls. Be sure the tape’s straight and even against the wall to stop any paint from flowing through.

Step 6: Apply Primer

Primer is essential in any painting job to help the paint stick to the wall and provides a smooth, uniform area for applying the paint. Apply a primer layer on the wall using an art brush or roller, beginning at the top and moving downwards. Make use of a tiny brush to penetrate any small areas or corners.

Step 7: Apply Paint

Once the primer is dry completely, it’s now time to use the painting. Utilize a paintbrush or roller to spread the paint, starting at the top and working your way downwards. Use a tiny brush to reach small areas or corners. Make sure that you apply the paint evenly, and make sure you don’t leave any traces or brush strokes. To know how long to wait between multiple paint coats read this article now.

Step 8: Let It Dry

Let the paint completely dry before removing the tape used by the painter and sheets of plastic from your toilet. It usually takes around 24 hours. However, you should check the paint container for specific drying timescales.

Step 9: Reinstall the Toilet Tank Lid and Seat Cover

After the paint has dried and dried, you can reinstall the toilet or seat covering lid. Be sure not to scratch the paint with the hardware while reinstalling the items.

Step 10: Clean Up

Then, it’s time to get rid of the mess. Get rid of the painter’s tape and sheeting of plastic from the toilet and other surfaces. Rinse your paint brushes and rollers using soap and warm water and let them dry completely before storing them.

Paint Behind a Toilet With a Thin Roller

Paint rollers can be a fantastic option for you to apply paint to walls. The typical paint roller covers measure 2 1/4 inches wide, which is too heavy for the space behind the tank. The best solution is to choose the thin, high-density roller that’s only 1 or 1/4 inch in diameter. Since you’ll wrap the entire toilet tank with plastic, the entire area is protected from drips and smears.

Protect Tank

The lid off the toilet and place it in a safe place. Place a clean garbage bag opposite on top of the toilet tank. On the toilet end of the tank, tie the plastic and secure it using an elastic band.

Pour Paint

Pour approximately 1 cup of paint into the paint tray that measures 6 inches. The foam roller should be dipped into the tray. It will dry out across the tray.

Paint Behind the Toilet Tank

Continue to paint the wall paint in the bathroom. Wall paint on the wall behind that toilet. As much as you can (about 5in). There will be an unpainted area behind the tank that nobody can see.

Paint Behind Toilet Bowl

You can paint the wall beneath that tank (directly behind the toilet bowl) using the thin paint roller or switch to the traditional paint roller or brush.

how often to paint your house easily explained for you

Choosing the Right Type of Paint for the Bathroom

When choosing paint, remember that humidity and moisture in bathrooms are usually much higher than in any other room of the house. That means that walls are more susceptible to mold, water damage, growth, and rot when you do not seal the moisture using the correct paint.

Choosing an oil-based or latex-water-based paint for your bathroom is possible. Still, you’ll be considering the bathroom’s ventilation options before deciding. Oil-based paint is generally rich in volatile organic compounds (VOCs). It produces strong emissions that make working within a tiny area difficult. Water-based latex paints are an ideal choice for bathrooms that have poor ventilation.

Choose paints designed for bathrooms to ensure your safety while working for the most effective results. Paints advertised as washable, mold-resistant, and low-VOC are likely to have greater durability, are infused with anti-microbial properties, and are safer to use than paints that release strong chemical fumes.

Conclusion

In the end, no one will ever be looking through the bathroom, and that’s the reason many people do not paint back there. You must employ an old-fashioned roller paint swipe or the last option to complete a specific task. You might need to remove the tank to ensure you can enter to paint on the walls in front of the toilet.

how to paint a door easily with these tips shared in this post

Frequently Asked Questions

What color primer should I use?

If you’re planning to apply a primer color, you must use white. A white primer is an excellent option for any type of surface. It can help determine the color that the new paint job develops. You can mix colors to create the one compatible with the surface you’re painting. It helps conceal any marks previously on the surface caused by tapes or products used in the installation process.

Can I paint over an existing paint layer behind the toilet?

In most instances, you can apply the painting behind the bathroom as long as it is still in great shape and isn’t peeling or flaking. When the paint seems damaged, or in poor condition, it’s ideal to get rid of it before applying an entirely new coat.

What type of paint should I choose?

Use oil-based paint. This is the most suitable option for painting over porcelain as it adheres better to it than other kinds of sealants and paints, meaning that the new color will look good for a long time.

Do I Need Special Paint to Paint a Bathroom?

“Special” might not be the best word. Choosing a paint that doesn’t increase or fall off when exposed to different temperatures and moisture is essential. One of the most effective paint types for this task is water- or latex-based paint because of its intrinsic resistance to these forces.

How do I clean the walls behind a toilet?    

Reaching behind the toilet to wash the bathroom walls can be as difficult as painting the walls. The most effective cleaning method to clean bathroom walls involves sponge soapy water out of buckets using only a few drops of dishwashing liquid and some teaspoons of baking soda, if you require. A normal and flexible household sponge can be squeezed into places that even microfiber or paper towels cannot access. Use a clean sponge to clean the area. The sponges can be tossed away after you have finished.

Tushar

Being associated with art and craft field since decades as a hobbyist and life long learner has given me an opportunity to learn many new things related to art, craft, paints and pottery which i am trying to share with your guys on this website. I have expertise of being professional painter and potter for the last 20+ years

I have learned mind blowing cool tips and insights which makes me a person with ability to improvise and come up with creative ideas and solutions to make stunning and impeccable art pieces of all types which are adored by people across the globe on this website and other platform.