Does Hot Glue Work On Wood

Hot glue guns are one of the most effective ways to use hot glue for wood-based projects, plastic projects and other surfaces easily. They can be used for DIY repairs to furniture or cabinets, or buildings with wood.

Hot glue is a great choice for the majority of woodworking projects. But, certain woods are required to be bonded with other substances. The best solution is to use a specific glue designed specifically for wood. Hot glue is one type of glue composed of thermoplastic polymers. It is typically sold as solid cylindrical sticks with varying dimensions designed for use by a hot glue gun.

Are you interested to know if hot glue works on wood?

Yes, hot glue can be sprayed on wood and works great to join it easily with other surfaces and wood. The glue gets heated up to melt down at a certain temperature. Then it is loaded into the glue gun. It is then applied to the wood with care. Then, a second part of the wood must be positioned between 25 and 35 minutes. Following that, an interval lasts for 24 hours before drying.

However, this isn’t sufficient for your needs. This article explains the way that hot glue performs on wood. This means that you’ll get to learn a lot about glue.

What is Hot Glue?

It is a thermoplastic glue that is melted in a glue gun. Then it is applied in a liquid form to connect surfaces. When applied, the glue is solidified as it cools and forms strong bonds.

The quality of hot glue depends on various factors, including the thickness and type of the material to be connected and the amount of adhesive applied, the adhesive’s surface tension, and the temperature at which the glue was put on.

In general, hot glue is an adhesive with strength that can hold 3 tons per sq inch (PSI) of pressure.

Is-Hot-Glue-Toxic or

Does Hot Glue Work on Wooden Surfaces and Other DIY Woodworking Tasks?

Hot glue is a method to glue wood and is often employed to construct woodworking pieces. It’s a good solution for bonding irregular rough, porous or rough surfaces like gluing embellishments or decorations to a wood-based project.

It can also be useful to temporarily hold wood pieces together during assembly since it sets quickly and is easily removed. Hot glue can be used to complete a range of woodworking tasks and other uses, such as:

Temporarily joins Wood Pieces.

Hot glue is a simple adhesive method between wooden components or other substances. Hot glue is applied as small dots on the edges of the joint and allowed to be set.

Fill Cracks and Holes

Filling in cracks, gaps and holes, knots, cracks and similar things using hot glue is another cost-effective alternative. But, woodworkers rarely employ this method; instead, they prefer using filler or wood putty to get an even surface.

Combines with Wood Glue

If two boards must be secured before clamping together, the mix creates strong joints because it is a more durable adhesive. But, this is not required as either glue can do the job.

Quick Sawing

Cutting through multiple boards of wood at once is much easier when hot glue is employed. The glue stops the board from shifting during cutting, allowing greater precision cuts.

Small Wood Binding Tasks

Hot glue can join two small pieces of softwood, similar to popsicle sticks. Hot glue makes a sturdy, clean, clear and neat joint. Additionally, it is unnecessary to worry about wood becoming swollen because it’s not likely to bear significant weight.

Fix Softer Materials To Wood

Do you need to secure paper, fabric, or another delicate material to the wood surface? Hot glue can be a solution for those who prefer not to puncture the material using small placeholders or tacks.

Enhance Routing

Routing can be made easier by the use of hot glue. You can start using it once you have applied hot glue to the work area and wait a few minutes until it is dry. Connect the workpiece to the adhesive that is semi-dry and begin the routing.

how to glue acrylic surface to wooden surfaces easily, find out in this article for you to make creative diy craft items

Does Glue Sticks Work on Wood?

For a project that is based on construction, glue sticks will not be able to hold the pieces in place, so you’ll require a different method.

Regular wood glue works best for most wood projects, and it’s not costly. Sealing the bottle thoroughly each time will last for a long time.

Glue sticks won’t be able to hold wood glue in the wood-to-wood joint. But, if you want to attach wood temporarily to something, they can be a good alternative. It is a good alternative when you require an easy solution. For example, attaching the template of a router made of wood to masking tape and then affixing it to the piece of work or ornaments that have no physical strength to the bond.

How Much Time Does It Take for Hot Glue to Dry on Wood?

A glue joint may be dry for no more than 20-30 minutes when it is properly set. However, this can be longer than an hour if the temperature is colder.

There are a variety of formulations, each with different temperatures. However, those commonly used in hobby guns typically have 120 C/240 F melt points.

Another aspect is how long you allow it to rest inside the gun before applying it. If you allow it to sit for a few minutes and allow the glue to reach its maximum temperature, then the duration of work is extended. The dense air breaks the glue, which causes it to dry rapidly.

Can Hot Glue Work On Painted Wood?

Wood glue is a great choice on wood that has been painted. The heated gel-like substance bonds with the paint layer on the wood and can be absorbed by the painting layer.

Hot glue is made up of thermoplastic polymers which join wax. But, putting the glue on the painted surface does not guarantee a solid connection you might want but to answer your question, yes it does work on painted wood surface depending upon type of wood used and type of colors painted on it.

The joint may not be as strong as the paint should you want to use wood glue over your painted surfaces.

The glue must penetrate wood fibers to create a solid connection between two surfaces, not glue-painted wood.

A majority of these wood glues can be used to wood with no painting on it. If wood is painted with oil-based paints, there is a need for another kind of glue.

Surfaces that have been painted with oil and with wood glue don’t become wood fibers. This means that the joint isn’t sufficiently solid.

It is recommended to sand, scrape or cut the painted edges if you intend to glue the surface in the hope of achieving a solid joint.

kids using hot glue on painted wooden sticks for craft

What are the main factors that influence the drying period for wood glue?

  • Stressed Or Unstressed Joints

The time it takes for the glue to dry fully depends on the pressure the bond is subjected to. A shelf held by two planks of timber underneath it doesn’t cause any pressure or stress to endure. Keep the joints for around 30 minutes to 1 hour to reinforce their connection. A joint like this requires keeping the two boards together for at least a few hours.

  • Type

The wood glues you find aren’t identical. There are a range of them, and each one has its own formula that impacts the drying process. It is essential to know the time it takes for glue to dry. It is important when selecting the right glue for the job you need to do.

Polyvinyl Acetate

This kind of wood glue is quite common. It can be identified because of its dense consistency and pale yellow color. The glue is a water-based substance. This means that when the water begins to evaporate when in contact with air, drying will begin.

PVA is a form of glue that is water-based, and it provides an even stronger bond than the wood used. This makes it effective in a variety of carpentry work. PVA can dry faster on corrugated boards, particularly when drying agents such as polyvinyl alcohol (PVA) are incorporated into the glue. Most glues are left for 30 minutes to a little over an hour, then dry in a day.


Polyurethane is a kind of glue that’s not water-based. It’s extremely effective in areas with significant moisture because it can dry quickly when exposed to these conditions.

It’s dry for around two hours, and it takes an entire day to dry.


Epoxy is a kind of glue that utilizes the chemical reaction of the hardener and resin. The reaction occurs inside separate tubes.

Polyurethane can dry up after exposure to water. PVA glue is dry after exposure to the air. It takes longer (72 days) to completely dry. However, it is more durable than other glues.


Many refer to glue by the term superglue. It can be applied to different types of material, including wood.

Superglue, also known as Cyanoacrylate, is quicker to dry compared to Epoxy PVA, Polyurethane. It sets within 10 minutes and can take a full day to completely dry.


Hide is rich in collagen. Collagen is an important ingredient in the making of glue. Many carpenters make use of it because it dries transparently.

It is extremely resistant to shifting joints during drying. It can be reversed and does not shrink during the process of drying. The glue will harden slowly after it cools to room temperature.

How to glue plywood together: read detailed guide here

Frequently Asked Questions

Is Hot Glue Permanent On Wood?

Hot glue isn’t a permanent fixation for wood. In time, it’s susceptible to leaking out of the glue because it’s drying and will harden. When it dries, it can break.

It is possible to remove adhesive by rubbing acetone or rubbing alcohol around the edges of your glue area.

 Is Hot Glue Waterproof On Wood?  

Hot glue isn’t impervious to water on wood. Wood is among the most susceptible to exposure to water. Suppose you do not apply water sealant on your wood. In that case, it will absorb water and become bloated, putting additional stress on your bond and rendering your hot glue joints useless.

Can Hot Glue Be Used on Balsa Wood?

Yes, you can use hot glue on Balsa Wood. However, the pieces must be thin and small. It’s not the best decision to use hot glue when Balsa Wood pieces are huge and heavy.

Add a Comment

Your email address will not be published. Required fields are marked *